Auto Transmission Oil Cooler Kit for Cooling Oil

Our Auto Transmission Oil Cooler Kit for Cooling Oil is a combination of oil tank, fan, air guide cover, fan cover protection net, temperature switch, filter. The filter is connected to the oil tank through the flange. Because the performance of concrete mixer cooler is outstanding, it is an indispensable basic part of concrete mixer.

The installation of the cooler in the concrete mixer is generally recommended to be put in a ventilated place to ensure that the flow of cooling air is not obstruct, and avoid the hot air reflow to the cooler.

The cooler is connected to the frame by two lower branches. In the installation process, the shock resistant blocks should be used in order to reduce the vibration during the driving process, thus prolonging the life of the cooler.

There`s an oil inlet and the pressure balance port on the top of the oil tank and an oil level gauge is equipped on the side. When used for the first time, oil should be added to the middle position of the oil mark, and the air in the system should be cleared up as much as possible during the refueling process. Every time after refueling, refueling plug should be tighten.

The motor used in the cooler is a DC motor with a service life of 5000 hours. Because the DC motor is not suitable for long term continuous operation, it must be used with the temperature switch and the contactor in the process of use.

The function of the temperature switch is to ensure that the fan operates intermittently through the action of "on / off" of the temperature switch. The temperature switch has been supplied at the time of delivery. The working process of the temperature switch is as follows: the oil temperature is quickly taken away by the cooling air, and the oil temperature drops rapidly; in the process of oil temperature drop, when the oil temperature drops to the lower limit of the switch temperature value, the temperature switch disconnects and the fan stops running.

The filter is connected with the cooler through the flange, the filter is an oil absorption filter, after the installation, the whole filter is immersed in the oil, only the end cover is exposed outside the oil tank, the filter core can be replaced through the end cover. When the filter core is replaced, the filter will automatically cut off the oil path. Therefore, when the filter core is changed, there is no need to empty the oil in the system. The filter is equipped with a vacuum gauge to show the contamination level of hydraulic oil.

About Us

We design and manufacture lots of kinds of heat exchangers like compact aluminum fin type radiator with efficient performance, the hydraulic oil radiator, radiator, oil cooler, heater, etc. Our products mainly can be used for air - air, air - liquid, liquid - liquid etc. And are widely applied to various military, armored vehicles, special vehicles, railway track vehicles, ships, aircraft, ground equipment, at the same time for petroleum, chemical, electric power, new energy and engineering machinery.

We keep developing and manufacturing all kinds of radiator, cold plate, liquid-cooled box and Other high efficient and reliable products.

The military, air conditioning system produced by us are widely used in aerospace military facilities, armored vehicles, ships, and other military application etc. We can provide solution for telecommunication room, base station control, air conditioning system, and various special vehicles, engineering machinery, air conditioning system etc.

Contact us if you need more details on Best Performance Transmission Oil Cooler. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Auto Transmission Oil Cooler Kit、Oil Cooler for Cooling Oil. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Product&Type > Concrete Mixer Truck Oil Cooler